Sheet Hidroimpresión Wood Has 50x100cm

1893
  • Sheet Hidroimpresión Wood Has 50x100cm
  • Sheet Hidroimpresión Wood Has 50x100cm
  • Sheet Hidroimpresión Wood Has 50x100cm
Sheet Hidroimpresión Wood Has 50x100cm
  • Sheet Hidroimpresión Wood Has 50x100cm
  • Sheet Hidroimpresión Wood Has 50x100cm
  • Sheet Hidroimpresión Wood Has 50x100cm

Sheet hidroimpresión Wood Has high-quality, easy to install and compatible with all our products, lacquers and activators. Brand: WrapWorkers Hydro®.

Measures: 50 x 100 cm NOTE: the roll width is 50 cm, if you buy two units, we will send 50 cm x 200 cm. If you buy three units, 50 cm x 300 cm.

Tax included
Quantity

FREE SHIPPING (More info.)
Do you have any questions about this product?
ASK US
VIDEO Sheet Hidroimpresión Wood Has 50x100cm You are ready? We explain step by step how to perform hydroprinting at home. Become a hydromaniac thanks to our hydro-printing kits do it yourself at home.
Visit our channel
  • DESCRIPTION
  • INSTRUCTIONS TO PLACE AN ORDER
DESCRIPTION

Film Hidroimpresion Wood Has

Film hidroimpresión Wood Has brand WrapWorkers Hydro®. Easy to install and lacquering. WrapWorkers Hydro® ensures a perfect finish and superior durability up to 10 years.

If you've never done any work of hidroimpresión we recommend trying our Kits Hidroimpresión that include everything needed to perform this process.

Steps to perform to install the blade hidroimpresión Wood Has been properly:

  1. Paint the piece of the proper color to the combination base + film hidroimpresión Wood Has become of the proper color. The most normal thing is to use a white base, silver or black.
  2. Prepare the foil hidroimpresión Wood Beech. Cut the desired size and encintaremos the edges with masking tape.
  3. Prepare a bucket with hot water (20-35°C). The cube you can buy it in any store, doesn't have to be anything special, except that it is something deeper to be able to submerge the entire piece.
  4. Put the film hidroimpresión Wood Has been above the surface of the water. The film has a position, to know that side is the one that goes towards the water to get wet our fingertips, and we'll get to the sheet on both sides. The stay glued to our finger is the one that will be touching the water.
  5. Wait 90 seconds, and spray with spray activator at an angle of 45° at a distance of 20-30 centimeters. With one pass of the spray over the entire surface of the sheet hidroimpresión Wood Has is enough.
  6. Once you have applied the spray activator to the surface will shine, wait 5-10 seconds and introduce the piece with an angle of 30-60° and slowly. Have to be taken into account which is the piece that “attack” to the film and not the other way around.
  7. Leave the piece for 30 min under water to the surface to adhere completely and miss the gel that is formed on the surface.
  8. Let dry the piece and apply lacquer. Apply lacquer gloss or matte (depending on the finish you want). It is important to apply the lacquer in amount and spraying the piece in full at a distance of 5-10 cm. Apply at least two layers of lacquer.
  9. Once you have applied the lacquer, let dry for 30 min (if it's cold this time may be higher).

Specialists in film hidroimpresión Wood Beech. Any doubt contact us.

INSTRUCTIONS TO PLACE AN ORDER
Do you have questions about how to order? Check out our video where we clarify all the steps: