Varnish and Lacquer Car

The varnish car or also called lacquer car are two essential elements to a spectacular result in the finish of the vehicle. And that is that there are several types if you need to buy a lacquer or paint to your car and do not know where to start, take note of these recommendations and aspects that we bring you.

Today we find different types of varnishes in the market for brand very varied but all meet, as required, to the regulations of VOC. All of these lacquers or varnishes serve to protect the paint for cars

In this way we find lacquers known as rapid. They are a kind of lacquer car designed for small repairs or repainting. Its use is usually given when you have little margin between the process of painting and mounting, for mounting it this well dry, and are not trademarks.

Lacquers normal. These lacquers are suitable for all types of processes repainting of vehicles. They are the most used at present a good relation quality/price of the product.

Varnish drive high range. Calls lakes of top of the range are lacquers are suitable for all types of repainted vehicles. They are more expensive and the finish is usually fairly good. They differ primarily because they leave more microm and also more brightness.

Anti-scratch. We also find lacquers, or paints, anti-scratch. Are lakes that carry certain high-end vehicles. They are characterized by being more scratch-resistant surface. These lakes tend to be quite expensive, so it is used only for those cars that already carry a series.

Paint or lacquer matte/satin. This type of lacquer is special because it does not have brightness or in the case of having it is a brightness very low. It is used for certain parts of the car, but there is a growing tendency to use this type of paint, especially, among the lovers of tunning.

FREQUENTLY ASKED QUESTIONS OF THE PAINT OF CAR:

It seems a lie, but did not make an idea of what that change the finish of a car wearing lacquer to wear. In Audioledcar we always recommend the best products to stop your vehicle, the better the results. Comment with any questions you have at the time of install, or questions about the products please do not hesitate to contact any of our agents via live chat, email or over the phone.

We have several lakes, if what you need is a lacquer that has a quick-drying, and to help you with repairs, or to protect a tire, we recommend lacquer spray.

If you are looking for something more specific and better quality and finish, we recommend the lakes of top of the range, as for example LACQUER GLOSS (two-component) – KSMOS, usually give a result with more brightness to normal.

If you want the opposite, a matte finish don't worry because we also have this finish, for those/those lovers of the tunning.

In this section you will also find products for the care/repair of the vehicle. With this we refer for example to the lacquer antigravilla, or lacquer headlights.

I would like to apply a lacquer shine to my mirrors, how do I do it?

If you want to leave your mirrors with this layer of shine and protection, we recommend that you SPRAY VARNISH GLOSS (one COMPONENT) – WRAPWORKERS. We advise that when you go to use this type of products, in a site-ventilated outdoor and covering those areas that we don't want to be in contact with the lacquer shine.

The installation procedure is the same if we want a lacquer with a matte finish.

In case you want to apply a lacquer more powerful and more professional, we recommend LACQUER GLOSS (two-component) – KSMOS that is usually applied with a gun.

I have the headlights of the car very badly, what could be used to recover the vision of the lighthouse?

We have the TOP in reference to the renewal of headlights for your vehicle. It is as simple as cleaning the lighthouse of dirt and after, lijaremos the lighthouse with the sandpaper that appears in the pack. Once you have sanded the lighthouse, we cleaned up the lighthouse of any rest and apply two coats of shellac to protect it. *Important* leaving the lighthouse to dry for more than two hours. *Important* it is very important to note the status of the lighthouse.

I have seen that in this section there are SPRAY ANTIGRAVILLA BLACK OR DARK GREY, what is it for?

This question is very normal, this spray it is available in different colors. The utility is as simple as protecting areas of the car that suffer the most damage in the driving. How to install the antigravilla is as simple as stir the spray, apply one coat and let dry for about twenty minutes, and then apply the rest of the layers, leaving the product to dry for up to 2 hours approximately.

I painted the hood of the car of a different color from the rest of the car, how could I fix it to make it the best possible?

If you has passed something similar, don't worry about that Audioledcar we give you the best of the solutions. In this section you will find a product called SPRAY SOLVENT BLUR TO BLEND the TWO LAKES DIFFERENT. What is the function of this spray? It is a product that serves to blur and get it to unify the colors.

*Advise* that does not cease to be a product that can become toxic, so we recommend that you utilize all of the tools needed to avoid any risk as, for example: safety glasses, gloves, mask and protective overalls to avoid any stains that may appear.