Vinyl Colors

Sheet Vinyl color Car and Motorcycle

Shop specialised in vinyl For colors where you will find a sticker, vinyl, high-quality color for your car, motorcycle, or for decorating any piece you have in mind. Easy to install and high strength to withstand rubbing, scratches, sun, rain, snow etc

We have a ...

Sheet Vinyl color Car and Motorcycle

Shop specialised in vinyl For colors where you will find a sticker, vinyl, high-quality color for your car, motorcycle, or for decorating any piece you have in mind. Easy to install and high strength to withstand rubbing, scratches, sun, rain, snow etc

We have a wide range of sticker vinyl colors for your car. Choose the size that best suits your needs. Rolls of vinyl for car are 1.5 metres in width so you can choose the length you want. What is normal for the internal parts of a car is the measure 1x1,5 meters, as you have plenty of room to do any work and it's perfect.

How do I install the sticker of vinyl colors?

The vinyl color of the brand WrapWorkers® Series have three qualities that make them indispensable to achieve a perfect finish:

1-Are molded with heat: for the shapes of the curves we can apply heat with a blow-dryer and be able to stretch the vinyl to achieve the desired shape, as if a piece of gum you were.

2-they Are made with technology, Air-Drain®: this means that they have a network of micropores that are imperceptible to the human eye but which prevents the formation of bubbles of air.

Glue Japanese High Match®: get a grip perfect without damage to the surface or paint of our car. In addition, once you have the vinyl color can be removed without leaving any residue.

The most common for installing the vinyl roof of the car, the mirrors, the bonnet, the interior trim, centre console, the handles of the car, closets, mobile, tablets, computers, logos, the vents in the car, helmet on the bike and any place you can think of.

And, best of all is that if you don't like it as it is, I can remove!. We recommend you to visit our YouTube channel to watch the guide that we have on the installation of vinyl colors

-

VINYL COLORS TO DECORATE YOUR CAR

Currently, the customize and/or improve our vehicles has become a practice very common and sought after by a large number of drivers. That's why on our website we provide sheets to suit the tastes of all preferences.

In this section of vinyls you can find a very wide range of colors so you can choose the one that best suits your needs. From the color to more demand as it is the black, to the more original as the red glitter. In addition, in many of these colors we have the option that you can choose between gloss or matte. All the products in this section have a photo of guidance to be able to help you at the time of your choice.

The most common areas of the vehicle in the most often used application of the vinyl are, for example, the hood, the interior trim, grilles, etc., But thanks to its high quality can be used both in car and motorcycle, as in any part of your vehicle or any piece that happen to us. On our website we provide you the option of choosing the size of vinyl that best suits your requirements. Our vinyls have a width of 1.5 m, thus giving the possibility to choose the length that you want.

These vinyl colours of the brand known WrapWorkers, due to its optimum quality, are able to give us the perfect finish you're looking for. Simply we will need to know well-the size of the piece to vinilar.

What do we need to install a vinyl?

The only tools that you will need to install a vinyl will be:

-A cutter or similar tool, to be able to cut the leftovers after its installation. And, also, to be able to use it in the event that we have purchased a large roll and want to cut pieces of different ways to use it in different pieces.

-Dryer or machine heat to stretch the vinyl and get mold it to the desired shape.

So if you're doing the typical question of can I put a vinyl myself? , the answer is yes. We just have to have in mind that we will need to wash the area to vinilar previously and dry it properly, so that we will get the glue from the vinyl will adhere properly. The steps to follow to perform the practice of labeling would be the following:

-We have to put the vinyl on the surface or required part and we will shaping so that there is no bubble or imperfection.

-Once you have covered the area, we will have to remove with a cutter (or any tool similar) the leftovers to achieve the desired result.

-We must let it sit for a few hours, and try not to wash it in a few days (the latter in the case of the area vinilada has been the exterior of the vehicle).

In relation to this last step, we always have in mind the issues of how the vinyl can be washed? do I need a special care for the vinyl of my car? The only thing we have in mind is that a pressure washing cares a lot more of our vinyl to a car wash, and we do not lack special products for washing. Regarding the latter, note that there are many different types of products for the care of our vinyl, but tend to be products restaurateurs to try to achieve a more prolonged duration.

We could say that the life of the vinyl ranges between 5-10 years. Although, keep in mind, that yes it is possible to remove it in a safe way if we get tired of it or if you want to again give a new aesthetic to our vehicle.

How to remove a vinyl?

The ideal way to do this would be by applying heat on the area to check out (with a heat tool, or simply with a hairdryer). The heat causes the glue to soften and lose adhesion to the area. Thanks to the optimidad of our vinyls in the area that the retreat will not be damaged and, in addition, will not leave any kind of residue.

All our vinyls are 100% recommended due to its high quality and its long duration.

We suggest to visit our YouTube channel to watch the guide that we have on the installation of vinyl colors.