Sheet Vinyl Wood, Car and Bike

Do you want to have one of vinyl's most original and similar to reality? We present to you one of the several sections of Audioledcar where you'll find the best vinyl wood effect. If yes, you read that right, WOOD EFFECT!

You might wonder, how and where can you put t...

Sheet Vinyl Wood, Car and Bike

Do you want to have one of vinyl's most original and similar to reality? We present to you one of the several sections of Audioledcar where you'll find the best vinyl wood effect. If yes, you read that right, WOOD EFFECT!

You might wonder, how and where can you put that kind of vinyl so unique?

Many of our clients, both individuals and professionals make this work either in vehicles, especially in interior as well as exterior, doors, street, and garage, and even... in fridges! *

We recommend that the vinyls are not used in foreign ships, is not a product that you can be prepared for the constant contact with water.*

We work with the best brand of the market in terms of design, durability (4-5 years) and installation WRAPWORKERS.

We'll start by presenting the following vinyl wood effect that we have. First of all tell you that our vinyls have always the same format as. That is to say, the width of the vinyl is 152 centimeters and the only thing that changes is the length of the vinyl. We have some standard measures that we add here:

-25cmx152cm (25 inches would be long and 152 centimeters in width).

-50cmx152cm (50 inches would be long and 152 centimeters in width).

-75cmx152cm (75 inches would be long and 152 width)

-100cmx152xm (1 meter would be the long and 152 width).

-200cmx152cm (2 meters would be the long and 152 width).

-300cmx152cm (3 meters would be the long and 152 width).

-500cmx152cm (5 meters would be the long and 152 width).

-1500cmx150cm (15 meters would be the long and 152 width).

If in your case what you want is another measure of more than 15 meters, please contact us and we will inform you.

The two designs that we have of wood, are the two following:

-WALNUT WOOD (also called dark-wood) is the design that we have more resemblance to this type of wood. Tell them that the orientation of the veins is of width to length.

-WOOD BEECH (we also call it as light wood) The orientation of the grain is also a wide throughout the vinyl.

What if I have never placed vinyl? How is it done? Is it difficult?

If you have never placed vinyl, first we advise the following, and is to take the smallest measure to practice the installation. It is not complicated installation, but we believe that if you have never done vinyls, test before.

You can start on a flat surface and with the help of a heat gun (or a hair dryer on medium heat) go taking off the vinyl and apply the heat to the vinyl go stretching.

Then with a spatula (working tool that you will find in this section) go smoothing the vinyl to avoid be any air bubble.

If you also want to make bends, we also recommend practicing the way of installation.

-

What if I put wood vinyl in the car? How can I clean it?

This question is very typical and normal, between our customers, it is important to emphasize that the vinyl exterior you should not get in sinks, but do not worry because we have several products and tools specific section in the cleaning the exterior of which will help the vinyl to keep it clean and protected.

Shop specialised in vinyl Wood where you can find an sticker vinyl high quality Wood for your car, motorcycle, or for decorating any piece you have in mind. Easy to install and high strength to withstand rubbing, scratches, sun, rain, snow etc

We have a wide range of sticker, vinyl Wood for your car. Choose the size that best suits your needs. Rolls of vinyl for car are 1.5 metres in width so you can choose the length you want. What is normal for the internal parts of a car is the measure 1x1,5 meters, as you have plenty of room to do any work and it's perfect.

How do I install the sticker, vinyl Wood?

Vinyls Wood of the brand WrapWorkers® Series have three qualities that make them indispensable to achieve a perfect finish:

1-Are molded with heat: for the shapes of the curves we can apply heat with a blow-dryer and be able to stretch the vinyl to achieve the desired shape, as if a piece of gum you were.

2-they Are made with technology, Air-Drain®: this means that they have a network of micropores that are imperceptible to the human eye but which prevents the formation of bubbles of air.

Glue Japanese High Match®: get a grip perfect without damage to the surface or paint of our car. In addition, once you have the vinyl Wood can be removed without leaving any residue.

The most common for installing the vinyl roof of the car, the mirrors, the bonnet, the interior trim, centre console, the handles of the car, closets, mobile, tablets, computers, logos, the vents in the car, helmet on the bike and any place you can think of.

And, best of all is that if you don't like it as it is, I can remove!. We recommend you to visit our YouTube channel to watch the guide that we have on the installation of vinyl, Wood