Kit Xenon Moto

Although the majority of the customers are looking for the kits, xenon for the car, we want to inform everyone that we also have a kit, xenon for motorcycle! And is that although it seems that not, the lighting of the bikes are very similar to the cars but with the difference that it is only a light bulb.

In Audioledcar we are here to help you with any questions that you may have no problem!

What do we have to take into account if we want to change our lighting series to xenon?

This question is very typical and it is normal to do so if you do not have knowledge of light bulbs, but we're going to give a series of steps to follow for choosing the right kit xenon better can be attached to the bike.

-Cap of lamp: with this we mean that you should look at that cap bulb leads of the series (if H1, H2, H7, etc)

-Current type takes the bike if it is alternating or direct.

-The year of the bike: that is to say, to know if the bike is higher than the year 2005, to know that we need a kit that carry resistance canbus to avoid such failure of light cast from the box of lights.

-To know if the lighthouse itself of the bike carries a magnifying glass or not: (usually happens with BMW motorcycles).

-

I changed the lighting from halogen to xenon and the next week I pass the Technical Inspection of the Vehicle (ITV) is The pass?

The million-dollar question. When we change the lighting of our bike we take in account that is not approved. That is to say, all that is change of lighting series is NOT officially approved. Therefore when we go to ITV we should put lights or halogen but good to homologate the lighthouse in any specific place in charge of it.

-

How do I change the lighting of the bike? Is it an easy install?

Like everything, it depends on the bike you have. Always encourage our customers to first prove themselves to perform the installation having been before informed of the process.

It is so simple (depending on the bike) that with everything off, remove the headlight cover and carefully begin to remove the light bulb series.

After you have taken the first step, we will see how willing the circuit ballast-bulb and will find a way to position it without dropping it. Subsequently we will remove the protector of the bulb and place.

After you connect the ballast to the power of the bike. Once we finish we will try turning on the lights of the bike if you have been well.

Surely hear a noise like a hum, but it's normal, it's the noise that makes the ballast, so don't be afraid.

*Important* if you have any doubt about installation, problems, etc, please do not hesitate to contact us.

-

I've put a kit xenon ZesfOr and the bulb does not work for me. What could have happened?

When this happens, we always recommend first of all a few tests to know if the problem is in the bulb or the ballast.

Many of our customers when they melted a light bulb, think that it is problem of the light bulb, but many times by the ballast.

If this happens, we recommend that you call us and explain the process as we like to apply the product warranty.

-

What I aconsejáis put xenon to my bike?

The answer is yes. The xenon is very good if you are looking for is a greater range of light thanks to the xenon gas that produces a white light for the driver to see and above all, and very important for the rider to be seen by all other drivers of vehicles.

All the lighting xenon bike you can find here. Choose your base bulb and the color, you install the kit, xenon bike and enjoy a few new lights and bulbs xenon for your motorcycle. Brand ZesfOr: high quality and finish.

What will enhance our visibility with a light xenon? IF you and also we will increase our security as the rest of the cars will see us well on-road and city.

The color of bulbs that we recommend for your bike is xenon 6000k for his bright light, white and of high intensity.