Lacquer hidroimpresión matte professional finish. High quality and resistance. Spray lacquer easy and fast to apply, perfect to give the final finish to the work of hidroimpresión. Durability 10 years. Soft touch.
Lacquer for Hidroimpresión Car and Bike
Lacquer hidroimpresión brightness for car or motorcycle. Spray lacquer transparent single-component brightness. Resistant to the outdoors.
Lacquer hidroimpresión matte ideal for applying in the work of Hidroimpresión. A must-have if you want to protect your design in front of the sun, water, scratches etc
1-Apply on surfaces to which they have done previously a work of hidroimpresión.
2-The surface must be dry to apply the lacquer.
3-Apply two coats at a distance of 10-20 inches over the entire surface of the piece to lacar. Apply the lacquer hidroimpresión mate in amount to achieve a professional finish.
Drying time between each coat: 20 min. Time of drying: 30 min in normal conditions.
Specialists in lacquer hidroimpresión mate. With a professional finish.
Technical data sheet lacquer hidroimpresión:
Varnish single component made of acrylic resins does not amarilleantes high resistance to abrasion and weather influences such as UV radiation, sudden temperature changes, salt fog, etc, all of this is designed for direct application on bodies, to give a MATTE finish, < 5% gloss angle 60o/60o. Complies with regulation of maximum content of VOC as per directive (1999/13/EC).
Application lacquer hidroimpresión:
Designed, to apply as a final layer in all kinds of bodies, such as: -private Vehicles - motor Coaches - Buses - Trucks - commercial Vehicles in general - Coating of structures and chemical industry in general. Approved as M-1. It can also be applied and used on other type of surfaces (consult technical department) to create a gloss or matte finish.
Caution lacquer hidroimpresión:
Caution should always be present. These paints are highly flammable, and should be avoided the exposure to fire or high temperatures. The container must not be punctured or attempt to be filled in once complete its maximum capacity (400 ml), since they are containers filled to pressure, and any mishandling could cause the explosion of the same.
If you have any questions about this product, please make a question to solve it.