DTE Systems

The chip tuning by DTE Systems is without doubt one of the companies of reference in the world of the chip power.

DTE Systems is responsible to develop, produce chip increases power to cars, trucks, tractors, and even boats. Their chips can increase the engine's power is between 25 and 3...

DTE Systems

The chip tuning by DTE Systems is without doubt one of the companies of reference in the world of the chip power.

DTE Systems is responsible to develop, produce chip increases power to cars, trucks, tractors, and even boats. Their chips can increase the engine's power is between 25 and 30 %, in addition, thanks to these optimizations in the engine, achieve reductions in the consumption of up to 15 %.

Also have a second range of products as it is the PedalBox: a tuning of accelerator for all cars with electronic throttle. The PedalBox shortens the response time of the throttle response and leads to a noticeable improvement in acceleration by approximately 10 %.

DTE Systems has a catalog of chips for more than 4000 vehicles including certificates of components TÜV.

To be able to provide such TÜV certification (required in Germany and other countries), DTE conducts an audit in accordance with the guidelines of ISO 9001 every two years.

Examples of the high quality of its products are components such as aluminium housing heat-resistant, high-performance CPU that allow for real-time calculations and the plug-in connections with the quality of the original equipment.

-

How to install an on-chip power DTE systems?

One of the great advantages of these chips, is the ease of installation.

You will not need to go to a workshop, this chip are designed to be able to do a self-installation quick. With the included instructions and illustrated in detail, you'll be able to make a setup of your own without difficulty.

You do not need any special tool, welding, soldering, or similar. The systems are already adapted to the respective type of vehicle, and do not require manual settings for additional print.

-

How does an on-chip power DTE systems?

These chips are connected to the sensors central management of the engine. In this way, the incoming signals are recorded, optimize and passed dynamically to the control unit. All control parameters are optimally adapted in each power range. DTE uses here the latest technology tuning.

"Technology multimapa

Maps for each phase of power.

With the technology multimapa developed by DTE Systems optimizes up to five channels in real-time (pressure common-rail or load pressure, pressure turbo, pressure of the inlet pipe or mass of air); you can control the motors technologically demanding of last generation perfectly within a multimapa multi-dimensional using all of the relevant parameters of the motor. Configurable with up to three programs that driver can choose: Sport, Dynamic or Efficiency.

"Compatible with diesel particulate filter

A clean performance.

Another of the advantages of the technology multimapa is the fulfillment of the emission values legal for each car. The fuel use is 100 % for the optimised combustion in all areas of performance. The chips DTE can be used without problem on vehicles with a diesel particulate filter. The compliance of the emission values is confirmed by certificates of specific components of the vehicle.

"System sensor adaptive

Increase in smart power according to the wishes of the driver.

The sensor system, adaptive recognize the state of charge corresponding to the engine from all the motor data relevant and facilitates correspondingly the increase in power. If the driver requires a lot of power, for example, when overtaking, the chip is automatically activated. If you do not ask for more power, the chip is gradually reduced. Any adaptation of the control of the original engine is in perfect synchrony and dynamism. Thanks to this, you get more power when it is required and less fuel consumption when it is possible: this is tuning adaptive technology to the DTE.

"Auto adjustment function

It adjusts automatically to any driver.

With this innovation, systems DTE are able to learn the unique characteristics of your vehicle. The memory function records for a brief run-in period, the individual data from the different cycles of injection. The information obtained forms the basis of the optimization. In this way, we compensate for the tolerances of the series, and get an optimal result for each vehicle - no manual adjustments complicated.