Kit-tinted moons 95% for car and motor is no doubt the best option to protect the interior of our vehicle of the solar rays, as well as to give a modern look and present.
On this occasion, we worked with the brand Edo Films, one of the leaders worldwide in the tinted windows.
The Kit tinted moons 95% for car and motorbike it is a vinyl self-adhesive for easy installation, we have several opacities different according to the needs of each client.
To have a 95 % opacity, we get a dark moons almost total, so that we can reduce the heat inside the vehicle, plus get a sporty look to your vehicle
Kit-tinted moons 95% for car and bike is a sheet anti-scratch and have a thickness of 0.40 mm, ideal for installation in motor vehicles and motorcycles, is fully approved, so we can pass MOT.
Kit-tinted moons 95% for car and bike includes a sheet of 76 cm x 300 cm, stickers, approval and installation instructions.
Kit-tinted moons 95% for car and bike, if you want to get a tinted almost black, this is our product, we will get an opacity of almost total, so you won't see the inside and protect the most of the interior of our vehicle.
Kit-tinted moons 95% for car and bike is a sheet anti-scratch and have a thickness of 0.40 mm. Easy to install, it is the most simple and economic dyed our moons.
To have a 95 % opacity, allowing light to a 5%, we get a dark moons almost total, so that we can reduce the heat inside the vehicle, plus get a sporty look to your vehicle
Kit-tinted moons 95% for car and motorbike it is a vinyl of the brand Edo Films, one of the brand leaders in the market of the tinted windows.
Kit-tinted moons 95% for car and bike is fully approved, so we can pass MOT.
How to install Kit tinted moons 95% for car and bike?
• In the first place, we should remove the protective film, to prevent wrinkles during the separation, we recommend using a piece of adhesive tape.
• For placement on the side windows, in the first place, we must leave the window clean, we recommend soap and water and a squeegee glass cleaning.
• Then rociaremos the surface with soap and plenty of water and slowly install the sheet separating little by little the second protective film.
• To set the slide, we must treat the surface with water and begin to level the film, the movements should be from right to left and top to bottom.
• Once we installed the slide, we must leave to dry for two to three days.
• If still the remains of air or bubbles, remove with a hair dryer at a temperature not exceeding 200 ° C
As always, in Audioledcar, we have a service technician that will be happy to resolve any doubt or question.
Kit-tinted moons 95% for car and bike includes a sheet of 76 cm x 300 cm, stickers, approval and installation instructions.
Customer Questions and Answers