Kit-tinted moons 25% for car and bike

Kit-tinted moons 25% for car and bike is the best option to protect the interior of our vehicle of the solar rays, as well as to give a modern look and present.

The Kit tinted moons 25% for car and motorbike it is a vinyl self adhesive with which we will be colored moons in the rear of our vehicle.

The method of use is very simple, we just need to cut the vinyl with the extent of the moon, apply a little soap and water and install with a spatula, and heat, is to be made by the interior of the moon.

Kit-tinted moons 25% for car and moto deja light to pass through to a 75%, which has an opacity of 25%

Kit-tinted moons 25% for car and bike is a sheet anti-scratch and have a thickness of 0.40 mm

Kit-tinted moons 25% for car and bike with this fully approved, so we can pass MOT.

How to install Kit tinted moons 25% for car and bike?

• 1. In the first place, we should remove the protective film, to prevent wrinkles during the separation, we recommend using a piece of adhesive tape.
• 2. For placement on the side windows, in the first place, we must leave the window clean, we recommend soap and water and a squeegee glass cleaning.
• 3. Then rociaremos the surface with soap and plenty of water and slowly install the sheet separating little by little the second protective film.
• 4. To fix the foil, we must treat the surface with water and begin to level the film, the movements should be from right to left and top to bottom.
• 5. Once you have installed the slide, we must leave to dry for two to three days.
• If you still remnants of air or bubbles, remove with a hair dryer at a temperature not exceeding 200 ° C

Kit-tinted moons 25% for car and bike includes a sheet of 76 cm x 300 cm, stickers, approval and installation instructions.